PRODUCTS CENTER
Sweden High Pressure Pump 3D2HP
Flow Rate：91-240 L/min
Dimension：1866*2265*1000 mm
Category:
Product Description
Key Words：Industrial triplex plunger pump,Ship hulls cleaning，Ultra-high pressure water jet cleaning，Condenser descaling，Paint and rust removal
If the high-pressure pump fails, first of all, you should immediately dismantle it blindly without knowing where the failure is; second, there are no special tools and often damage the original good parts. The best way is to repair at an experienced and large-scale maintenance point, and replace overage parts and some wearing parts in time. Under normal circumstances, the high-pressure pump should be repaired every six months to prevent working with illness.
During the non-use period, the high-pressure pump should be lifted away from the water source in time, and the water accumulated in the high-pressure pump should be drained, especially in cold winter. Then put it in a dry place, and qualified users can also apply butter to the key parts of the high-pressure pump, and add lubricating oil to the bearings to prevent parts from rusting. In addition, the non-use period of the high-pressure pump is not as long as possible. If it is not used for a long time, it will not only easily corrode the parts, but also reduce the service life of the high pressure pump.
Tianjin Hewitt High Pressure Pump Co.,Ltd
Tel：+86 13389901626
E-mail：export01@tjhwst.com
Add：No. 1-1, Xinhua Industrial Science and Technology Park, Haihang East Road, Modern Industrial Zone, Ninghe District, Tianjin
Copyright © 2023 Tianjin Harvest High Pressure Pump Manufacturing Co., Ltd
Customer message