泉州High Pressure Pump 3D3Q
Flow Rate：91-240 L/min
Dimension：1866*2265*1000 mm
产品描述
Key Words：Industrial triplex plunger pump,Ship hulls cleaning，Ultra-high pressure water jet cleaning，Reactor descaling，Paint and rust removal
During the non-use period, the high-pressure pump should be lifted away from the water source in time, and the water accumulated in the high-pressure pump should be drained, especially in cold winter. Then put it in a dry place, and qualified users can also apply butter to the key parts of the high-pressure pump, and add lubricating oil to the bearings to prevent parts from rusting. In addition, the non-use period of the high-pressure pump is not as long as possible. If it is not used for a long time, it will not only easily corrode the parts, but also reduce the service life of the high pressure pump.
Generally, only one high-pressure pump is used for normal operation, because one large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large high-pressure pump is higher than that of the small high-pressure pump, so energy saving From a point of view, it is better to choose one large high-pressure pump instead of two small high-pressure pumps, but in the following situations, two high-pressure pumps can be considered to work in parallel.
Tianjin Hewitt High Pressure Pump Co.,Ltd
Tel：+86 13389901626
E-mail：export01@tjhwst.com
Add：No. 1-1, Xinhua Industrial Science and Technology Park, Haihang East Road, Modern Industrial Zone, Ninghe District, Tianjin
Copyright © 2023 Tianjin Harvest High Pressure Pump Manufacturing Co., Ltd
Customer message