Fully automatic tunnel cleaning system

2023-02-06


Highway tunnels have a high traffic volume and are filled with dust. In addition, the adhesion of automobile exhaust oil stains is strong, making cleaning difficult. Especially, there are many dust and mud stains on the lower part of the fire resistant board wall in the tunnel, which cannot be completely

Category:

Hotline

Hotline:


Project Details


Fully automatic tunnel cleaning system

 

 

Highway tunnels have a high traffic volume and are filled with dust. In addition, the adhesion of automobile exhaust oil stains is strong, making cleaning difficult. Especially, there are many dust and mud stains on the lower part of the fire resistant board wall in the tunnel, which cannot be completely removed by relying solely on daily cleaning. At present, mechanical cleaning is mainly used.
① The inner wall is mainly constructed by manual work and supplemented by mechanical work. Mainly manual scrubbing, with slow efficiency.
② The main principle of a tunnel cleaning vehicle is to use a cleaning agent in combination with a rotating brush. The cleaning agent is sprayed onto the inner wall of the tunnel, and the brush rotates together. Adopting mechanical cleaning method. The main feature of the high-pressure water jet cleaning equipment for tunnels is that the high-pressure water converts the kinetic energy of the high-pressure water into a striking force on the wall through the end fan-shaped nozzle. Thus completing the cleaning of the wall. Do not use other auxiliary measures to clean the inner wall of the tunnel to meet the national standard requirements, in order to meet the cleanliness and aesthetics of the highway environment, and ensure a high-quality traffic environment inside the tunnel. The parameters are:

 

Power

Telescopic and variable diameter

Cleaning width

Water consumption

Cleaning speed

353KW

0-3.5meters

2.5meters/4meters

20m³/h

2.4-5km/h

 

★The equipment adopts highly integrated operation, controlling all operations on the operating platform.

★There are a total of 6 hydraulic actuators driving the end effector, which can achieve 360 degree coverage cleaning within 3.5 meters of the tunnel without dead corners.

★Install a cleaning head under the vehicle to effectively clean the ground and side markings.

★The front-end cleaning head can be easily replaced, suitable for different working environments. For example, tunnel cleaning and maintenance, guardrail cleaning and maintenance, road cleaning and maintenance, etc.